Skip to main content
Workforce LibreTexts

2.1: Basic Electrical Circuits

  • Page ID
    3266
    • Chargers-Logo-CircleISO_F.png
    • Contributed by Camosun College
    • Sourced from BCCampus (Download for free at http://open.bccampus.ca/find-open-textbooks)

    Learning Task 2

    Describe basic circuit concepts

    You must understand how basic circuits function to properly diagnose and repair electrical problems. Now that you understand a simple circuit and how the basic components are connected, you can assemble more complex circuits and observe their characteristics.

    Basic electrical circuits

    A circuit must provide a complete path for current flow from the power source. The current must flow through a control device into an electrical load and back to the power source through a wire or through a vehicle chassis.

    In equipment, wire is normally used only on the insulated side of the circuit, since the return circuit is the chassis. Some components may require a ground wire from the component to the frame This type of circuit is called the single wire system (Figure 1).

    singleWireCircuit.png
    Figure \(\PageIndex{1}\): (CC BY-NC-SA; BC Industry Training Authority)
    1. Single wire circuit
      twoWireCircuit.png
      Figure \(\PageIndex{1}\): (CC BY-NC-SA; BC Industry Training Authority)
    2. Two wire circuit

      There are three types of basic electrical circuits:

      • series circuits
      • parallel circuits
      • series-parallel (combination) circuits