Skip to main content
Workforce LibreTexts

2.E: Self-Test 2

  • Page ID
    3233
  • Self-Test 2

    1. Which line in a drawing should be the darkest and thickest?
      1. Centre line
      2. Hidden line
      3. Object line
      4. Dimension line
    2. This line in a drawing is a broken line of alternating short and long dashes.
      1. Centre line
      2. Hidden line
      3. Phantom line
      4. Compression line
    3. What is the name of a line in a drawing that shows a hidden feature?
      1. Buried line
      2. Missing line
      3. Hidden line
      4. Concealed line
    4. A break line shows where part of an object in a drawing has been removed.
      1. True
      2. False
    5. A drawing should have all dimensions shown in every view.
      1. True
      2. False
    6. Which line is used to shows notes or specifications in a drawing?
      1. Leader line
      2. Object line
      3. Extension line
      4. Phantom line
    1. How are alternate positions of moving parts shown in a drawing?
      1. With a break line
      2. With a hidden line
      3. With an object line
      4. With a phantom line
    2. What does a sectional view in a drawing normally show?
      1. Outside of a part
      2. Inside dimensions
      3. Internal holes and slots
      4. Internal features of a part
    3. What do the arrows that locate a sectional view in a drawing indicate?
      1. Side the part is cut on
      2. Internal holes and slots
      3. Direction of the standard view
      4. Direction of observation when the section is drawn
    4. In the drawing below, indicate whether the dimensions shown by letters D2 and D4 are size dimensions, no dimensions, location dimensions, or notation dimensions.
      1. Size dimensions
      2. No dimensions
      3. Notation dimensions
      4. Location dimensions

    ST2_10.png