Skip to main content
Workforce LibreTexts

8.6: Unit 6: Haas Control

  • Page ID
    2290
  • OBJECTIVE

    After completing this unit, you should be able to:

    • Identify the Haas Control.
    • Identify the Keyboard.
    • Describe Start/Home Machine procedure.
    • Describe Door Override procedure.
    • Describe Load Tools procedure.
    • Describe Tool Length Offset (TLO) for each tool.
    • Verify part zero offset(XY) using MDI.
    • Describe the setting tool offset.
    • Verify Tool Length offset using MDI.
    • Describe the procedure of load CNC program.
    • Describe the procedure of save CNC program.
    • Explain how to run CNC program.
    • Describe the use of cutter diameter compensation.
    • Describe the shut down program.

    Haas Control

    The Haas control is shown in Figures 18 and 19. Familiarize yourself with the location of buttons and controls. Detailed instructions on the following pages show how to operate the control.