2.4: Training and Certification

The traditional way of advancing in the hospitality industry was to get an entry-level position and then work your way up to more skilled positions almost solely based on your work experience and learning from others. Today, formal training at a college or trade school is often needed if you are to advance in your chosen career, particularly if you wish to advance into supervisory or management positions. This training might be a post-secondary certificates, degree, or diploma; apprenticeship training; and industry certifications.

In any case, the industry still tends to promote people from within, and even with formal training, most people will start in entry-level positions and then work their way into positions with higher levels of responsibility over time. Advancement in the industry follows a logical series of progressive steps as you gain more experience, which is often referred to as the career ladder (Figure 1).

Figure 1. Typical career ladder for the kitchen.

Post-Secondary Training

Many public and private colleges and trade schools, and also some high schools, offer training in the industry for both the culinary professionals and those looking for training in front of house occupations like bartending or wine service and hospitality management. Most post-secondary programs group training into certificates, diplomas, and degrees, based on the number of courses and length of time it takes to complete. Many of these programs also ladder into other training such as apprenticeship or industry certifications.

Apprenticeship Training

Apprenticeship is a system of training that has been around for hundreds of years. Before there were trade schools and colleges, if someone wanted to learn a trade that person would seek out an experienced tradesperson (called a journeyperson or master, depending on the level of experience) and learn the trade by working with the tradesperson until he or she had developed enough skill to perform the job alone. This system has evolved to include formal training at a college or trade school, but still has two main components: practical training (practising techniques and procedures while producing products) and technical training (learning new skills). Practical training is achieved on the job, supervised by a certified journeyperson, and technical training is delivered by accredited institutions.

In British Columbia, all apprenticeship and trades training falls under the authority of the Industry Training Authority (ITA). For a full list of ITA programs and certifications, visit the ITA website.

For trades that are offered in multiple provinces, the national Red Seal program is available, which is a national endorsement that is added to provincial qualifications upon the successful completion of the interprovincial Red Seal exam. There are 57 Red Seal trades in Canada, including Cook and Baker in the food service industry. For more information on the Red Seal programs, visit the Red Seal website.

In British Columbia, there are three levels of certification available through apprenticeship, as shown in Figure 2.

Figure 2. Cook certifications in British Columbia. [Long Description]

With the various certifications, there are a number of options for working in the industry, as outlined in Figure 3. For more information on the certification and career options at each level, visit the go2HR Tourism, Hospitality, and Foodservice Apprenticeships page.

Figure 3. Career options related to Cook (Professional Cook 3) Red Seal certification. [Long Description]

Industry Certifications

emerit

The Canadian Tourism Human Resource Council (CTHRC) offers training and certification in over 40 tourism occupations from front line to management level, under the emerit brand. For a full list of training options, visit emerit’s website.

Canadian Culinary Federation certifications (Canadian Culinary Institute)

To progress beyond a provincial or Red Seal certification requires further training coupled with on-the-job experience. Much of the training is presently on an informal basis, but there are certifications offered by the Canadian Culinary Federation (CCFCC), Canada’s national occupational association for cooks and chefs, designed to fill this gap.

The CCFCC has two programs designed to certify chefs: Certified Chef de Cuisine (CCC) and Certified Master Chef (CMC). Candidates must take theory courses followed by written and practical examinations. Course components include theoretical and practical seminars and self-paced learning packages. For more information, see the Canadian Culinary Federation website.

In summary: There are many options, but the example below shows the different types of training and certification available in Canada for the culinary arts, and how they relate to each other. The interactive career map is available from the Canadian Tourism Human Resource Council.

Wine training and certifications

Additional certifications for restaurant staff include internationally recognized wine service certifications such as the Wine and Spirits Education Trust (WSET) courses and those offered by the International Sommelier Guild.

Long Descriptions

Figure 2 long description: Detailed description of each of the three certification levels of the professional cook certification program. The three levels are Professional Cook 1 (PC1), Professional Cook 2 (PC2), and Professional Cook 3 (PC3).

Professional Cook 1 lists workplace skills and products you can make from scratch.

PC1 Workplace Skills:

• Professionalism: personal hygiene, organization, teamwork and communication
• Workplace and food safety
• Use of tools and equipment
• Knife skills and common cuts
• Trimming and portioning meat, poultry, and seafood
• Following and adjusting recipes
• Basic terminology and nutrition
• Applying basic cooking and baking techniques
• Receiving and storage procedures

PC1 Products You Can Make From Scratch:

• Basic stocks, soups and sauces
• Common vegetables and fruits
• Basic potato, rice, and pasta dishes
• Basic meat, poultry and seafood dishes
• Salads, salad dressings, and sandwiches
• Eggs and breakfast items
• Basic pies and tarts, and cookies
• Fruit desserts and custards
• Basic quick and yeast breads
• Coffee and tea products

Professional Cook 2 lists workplace skills and products you can make from scratch.

PC2 Workplace Skills includes all PC1 skills plus:

• Preparing food for allergies and special diets
• Volume and banquet cooking
• Deboning meat, poultry and seafood
• Basic cost calculations
• Basic menu planning
• Taking inventory

PC2 Products You Can Make From Scratch includes all PC1 skills plus:

• Specialty soups and secondary sauces
• Specialty vegetables and vegetarian dishes
• Specialty potato, pasta and grain dishes
• Meat, poultry and seafood dishes for volume functions
• Specialty salads and dressings
• Hors d’oeuvre and appetizers
• Presentation platters
• Pastries, cakes and cheesecakes
• Laminated and specialty breads

Professional Cook 3 lists workplace skills and products you can make from scratch.

PC3 Workplace Skills includes all PC1 and PC2 skills plus:

• Specialty cooking methods
• Maintaining food safety systems
• Food and labour costing
• Basic teambuilding, leadership and supervision skills
• Buffet presentation and layout
• Basic wine knowledge and selection

PC3 Products You Can Make From Scratch include all PC1 and PC2 skills plus:

• Specialty and ethnic sauces
• Game and variety meats
• Specialty and classic meat, poultry and seafood dishes
• Pates, terrines, basic sausage making, curing and smoking
• Hot and specialty plated desserts
• Specialty cakes and tortes
• Frozen desserts, ice creams and sorbets
• Basic chocolate and sugar garnishes

[Return to Figure 2]

Figure 3 long description: A flowchart detailing career options related to the Professional Cook 3 certification. It list six different career paths, all of which have Certified Professional Cook 3 somewhere in the middle. The six paths are Restaurant (Casual/Family), Restaurant (Upscale Casual), Restaurant (Fine Dining), Hotel, Institutional and Camps, and Catering.

Restaurant (Casual/Family): One can progress from prep cook/kitchen helper, to line cook, to certified Professional Cook 3, to supervisor, to kitchen manager, to general manager, to franchisee.

Restaurant (Upscale Casual): One can progress from cold kitchen (garde manger), to line cook, to certified Professional Cook 3, to team leader, to kitchen leader, to regional chef.

Restaurant (Fine Dining): One can progress from prep cook/kitchen helper, to cold kitchen (garde manger), to cook, to certified Professional Cook 3, to sous chef, to chef, to owner.

Hotel: One can progress from prep cook/kitchen helper, to third cook, to second cook, to first cook, to certified Professional Cook 3, to chef de partie, to sous chef, to executive sous chef, to executive chef, to food and beverage manager/director.

Institutional and Camps: One can progress from prep cook/kitchen helper, to cook, to certified Professional Cook 3, to supervisor/sous chef, to kitchen manager/chef, to regional chef.

Catering: One can progress from prep cook/kitchen helper, to cook, to certified Professional Cook 3, to team leader, to sous chef, to chef, to owner.

[Return to Figure 3]

Media Attributions

• Kitchen Career Ladder by go2HR. Used with permission
• Cook Certifications in BC by go2HR. Used with permission
• Professional Cook career options. by go2HR. Used with permission