11.A: Review Questions
Complete as directed.
Fill in the Blanks:
- Employees working along, at, above or near wall openings where the outside bottom edge of the wall openings is feet or more above lower levels must have fall protection provided.
- The Fall Protection Standard sets up a uniform threshold of ________ feet for determining when fall protection is required.
- The top height of the guardrail shall be ________ inches, plus or as a minus 3 inches.
- Safety net systems must be installed as close as practical to the working surface and in no case more than ________ feet below such level.
- Where no mechanical equipment is being used, warning lines must be located at least ________ feet from the roof edge.
- Guardrails must be capable the standing a ________ pound downward force applied within ________ inches of the top rail at any point along the top edge.
- Covers for floor openings must be marked with the word ________ or ________ or shall be color-coded to provide warning of the hazard.
- The attachment point for a body harness, used for fall protection, shall be located where?
True or False: (Circle the Correct Answer)
- Several types of activities covered by the standard can be performed without fall protection provided the employer can demonstrate the fall protection is infeasible or creates a great hazard by its use. T or F
- If no other fall protection system has been implemented the employer must have a safety monitoring system. T of F